When You Need To Hire An Electrical Contractor To Install A Whole House Surge Protector

Posted on: 13 April 2022

Share  

If you've ever had a power outage at home, you understand the value of surge protectors. These gadgets protect your home electronics and appliances from power surges. Whole house surge protection is one of the most important devices to use for residential or commercial buildings. Internal surge protection protects against damage from power surges from the power grid and internal damage from turning high power devices on and off. An electrical contractor connects the protector between the panel and the power line. So what does this gadget protect from?

1. Lightning Strike

Surge protectors are wired to your home and do not require a power source to operate. House-wide surge protection prevents surges caused by lightning strikes. Lightning can overload and damage electronic devices. Household surge protectors prevent this by diverting current from the device to the ground before damage occurs.

2. Fallen Power Line

Electric surges can be caused by the power cord falling into the house. Contact with high voltage lines can cause huge overvoltages and damage electronic devices. They can also cause a fire that can spread to homes that are slow to unplug. electrical contractors wire surge protectors throughout the house so you don't have to worry about power outages damaging your equipment. They secure the entire house and limit the damage.

3. Increased Mass Power Demand

Sudden huge demand for the main grid causes fluctuations and shocks. This irregularity can damage connected home electronics. Surge protection in your home prevents damage due to increased demand near the power supply.

4. Wiring Short Circuit Failure

House-wide surge protectors are equipped with indicator lights. If there is a problem with the wiring in your house, the light will warn you. A good home-wide surge protector should display this error as it can cause a home fire or other electrical problems. This light may also indicate that an electrical contractor is needed to perform an electrical inspection of worn or broken wires.

5. High-Performance Cycling Equipment

You might not expect a high-power device to generate a surge, but it is possible. Internal surges are caused by electrical equipment such as washing machines. These shocks should not start the circuit breaker, but they can cause long-term damage to wiring and circuits. In order to protect your home from these types of surges, it is advisable to install full protection.

If you want to protect yourself from all these surges, please talk with your electrical contractor to plan for a full house surge protector.